8501 N.W. 90th St. Medley, Florida 33166 | Phone: 305-696-8660  

Standard Products
2000 La Porte French Door
4000 Designer Window
6000 Picture Window
7500 Single Hung Window
8500 Horizontal Rolling Window
9000 Sliding Glass Door
Impact Products
2200 La Porte HG French Door
3200 HG Casement Window
4200 HG Designer Window
6200 HG Picture Window
7700 HG Single Hung Window
8700 HG Horizontal Rolling Window
9200 HG Sliding Glass Door
9400 HG Sliding Door
Download Center

download NOA's

download Product Specs
download Installation Guides
download CAD files
download Engineering Docs

Autodesk DWF Viewer (Free Download) Adobe Reader (Free Download)


Contact Details


Lawson Industries, Inc.

Email request to Info@lawsonwindows.com

F: 786-924-7000

8501 N.W. 90th St.
Medley, Florida 33166

Lawson Windows' - 2000 La Porte French Door
Maximum Panel Size 35 3/16” x 93” (Nominal)
Configurations X, XX, OX, OXO, OXXO
Maximum Design Pressure Per Notice of Acceptance
Glass Thickness 3/16”
Muntin Aluminum Profile Exterior and Interior
Frame Color White,Bronze
Frame Depth 4 1/2”
Miami-Dade County NOA Reference Below


General Information
French doors shall be “La Porte” as manufactured by Lawson Industries, Inc., Medley, Florida, USA, conforming with ANSI/AAMA 101-93 standard, for SWD-RGS/F.E.R., Miami Dade County and F.B.C.


General Information
Extrusion shall be 6063 aluminum in T5 and T6 temper, with walls of from .078” to .125” nominal thickness at all structural locations. Frame jamb shall be tubular shaped. Head, jamb and sill shall have a dimension of 1 3/4” x 4 1/2”. Frame shall be assembled by securing head and sill to jambs using eight concealed sheet metal screws. Panels shall be assembled using a 5/16”-diameter, continuously threaded steel rod, running through top and bottom rail from stile to stile. Each rod end shall be held firmly with washered hex nuts. Sill shall have an overall height of 2” and contain a 1 1/4” step for panel rail to seat. Exterior face of rail shall finish flush with outside edge of sill. Door shall be exterior swing, providing the best possible protection against water infiltration. Frame head shall contain integral hood projecting out from header to deflect clinging water from running directly down head and into opening at top of panel. A double stacked bottom rail shall be available as an added option.


General Information
Door panels, jambs and headers shall receive an electrostatically applied organic 1.0 mil thick dry film organic coating which meets the performance requirements of A.A.M.A. 603.5 in a choice of bronze or white. All sills shall be mill finish.


General Information
Active door stile shall be routed for 2 1/8”-diameter dead bolt and latch with 2 3/8” backset. Concealed face of inactive leaf shall contain top and bottom flush bolts with stainless steel shaft to engage into header and sill, preventing inactive leaf from opening when bolts are engaged. Two heavy-duty extruded aluminum hinges with stainless steel hinge pin shall support each door leaf.


General Information
Muntins shall be adhesive-applied to interior and exterior surface of each panel and side light. Configuration shall be radiused profile extrusion on both interior and exterior side of unit.


General Information
All stiles and rails shall be weathered using a combination of a flexible virgin PVC bulb and polypropylene pile. Weatherstripping shall be so placed as to provide two points of protection in all vertical locations, and four points of protection in all horizontal locations.


General Information
Panels shall be glazed with 3/16”-thick tempered glass as standard. Glass color is as specified.


General Information
Panels shall be glazed with 3/16”-thick tempered glass as standard. Glass color is as specified.


Features & Benefits

Sturdy construction is based upon an aluminum wall thickness that exceeds 1/16” in many areas.

Visually appealing with deep jambs, wide stiles and rails that convey strength and confidence.

Matching side lights feature horizontal lines that match perfectly with the door.

Multi-point weathering is a combination of polypile weather-strip and flexible bulb vinyl.

Unique muntin profiles feature a distinctive design that is similar in appearance to traditional wood muntin configuration.

Security features include two deadbolts in a concealed face, on an inactive panel, that resist door from being opened. For two-point locking see back page.

Standard latch machining with factory-bored holes of 2 1/8” diameter with 2 3/8” backset permits the use of most latch and deadbolt hardware by others.

Product Resources

download Installation Guide

download CAD files

download Tech Notes

download Product Brochure

download NFRC Thermal Reports


Product NOAs

NOA document   NOA document  


Product Sample Settings
sample project featuring 2000 La Porte French Door
sample project featuring 2000 La Porte French Door